How To Handle Phones Can not Be in the Charger.

 

If the phone can not be in the Charger will occur there may be some damage done, among others:

The first possibility of damage can be caused from a charger (instrument rechargeable) battery of the mobile phone, the first step you can try your tool on a mobile phone charger similar, it is intended to be able to determine the possibility of your charger appliance is damaged or not.

The second possibility of damage can happen to your cell phone battery so that the battery can not be recharged again. To find out you can check on your mobile phone, battery recharging connector is still functioning properly. After that the next step you can do the testing and inspection on your mobile phone. The following is

 The following tutorial review mobile phone deal that can not be in the charger as follows:

1. If the message "Not Charging" on the screen of your phone or the charging process (rechargeable) runs on the phone but the charging process (refill) is running without charging the rechargeable battery or indicator on the phone is not running at a time when it undertaking a process of filling it from here can be ascertained damage is its charge IC. How to overcome that is by replacing the IC Charge long in Charge IC replace with new ones.

2. If the refill indicator on your mobile phone still goes on, while the phone is fully charged, it can be ascertained that damage is at its IC Power. The fix that is by replacing the IC Power is replaced with the new Power IC.
 How You Can not Handle on Mobile ChargerIf the phone can not be in the Charger will occur there may be some damage done, among others:The first possibility of damage can be caused from a charger (instrument rechargeable) battery of the mobile phone, the first step you can try your tool on a mobile phone charger similar, it is intended to be able to determine the possibility of your charger appliance is damaged or not.The second possibility of damage can happen to your cell phone battery so that the battery can not be recharged again. To find out you can check on your mobile phone, battery recharging connector is still functioning properly. After that the next step you can do the testing and inspection on your mobile phone. Here is How To Handle Phones Can not Be in the Charger.How To Handle Phones Can not Be in Charger

5. When you have finished charging mobile phones with a charger (rechargeable tool), you find leaks in the mains before you press the power-on, and when you press the power button-on the phone can not turn on. From these events can be sure the power supply capacity of leaking electricity. That its objective is the UI, PA, IC, IC Power which is connected to the battery voltage VBATT, units are often damaged and can present a variety of damage is IC UI, IC Power. In because Power is a BGA IC, the IC integrated, it is usually the method is made by releasing the IC UI, after which the phone back in rechargeable (charge), you need to consider is whether there is leakage of electricity. If there is no electrical leakage, it is certain that damage is IC UI, in case of leakage can be ensured that damage is IC Power. If the IC has been replaced as mentioned above, the problem has also been completed.6. If your central recharge (charge) phone, and then you press the ON button, but there is no electric current in on your phone so that the phone will not turn on. If you find a problem so, then you have to do is perform measurements on the R224, if found to have no VBAT voltage of 3.2 V at both ends, then the damage is in the Power IC is less than perfect or soldering at IC Power. How to overcome that do re-soldering the IC Power or Power IC can replace damaged with new power ICs.7. Try to flash your phone again.Likewise reviews from us on how to handle phone that can not charger may be beneficial. So thank you for visiting.